Blog

Q4 2026 WMC Insights: Winter Water Treatment Readiness

Written by WMC Water Management | Nov 18, 2026, 6:32:50 PM

Welcome to WMC Insights, your quarterly update on smarter, safer water treatment.

As facilities prepare for colder weather, now is a good time to check whether your glycol systems have the freeze protection they need and review what your water testing results are telling you. In this edition, we share a winter readiness checklist, look at how water treatment fits into preventive maintenance, welcome two new team members, and revisit a cooling tower case that saw results in one week.

Is Your Glycol System Ready for Winter?

Glycol concentration can change over time, particularly if water has been added to the system. Corrosion inhibitors can also become depleted, and the fluid itself can degrade. Testing before temperatures drop gives you time to address issues before the system is under peak winter demand.

Before temperatures drop, take time to:

  • Confirm the glycol type, concentration, and required level of freeze protection
  • Test pH and check inhibitor levels
  • Look for signs of corrosion or contamination
  • Check for leaks and review any unplanned water additions
  • Plan any necessary corrections and confirm how much glycol is needed

A few checks now can help protect your equipment and prevent costly winter disruptions.

Schedule a Winter Water Treatment Review >

Make Water Treatment Part of Preventive Maintenance

Scale, corrosion, and biological growth can affect equipment performance long before you see a problem. Reviewing water test results as part of routine maintenance helps your team spot changes early and investigate what’s causing them.

Build these checks into your maintenance plan:

  • Review water test results over time to identify changes in system conditions
  • Investigate unusual makeup water use or declining inhibitor levels
  • Include water testing in seasonal startup and shutdown procedures
  • Reassess water conditions after equipment or piping changes

Consistent monitoring can help maintain efficiency, extend equipment life, and reduce avoidable repairs.

Read More About Water Treatment and Preventive Maintenance >

Meet Our Newest Team Members

Please join us in welcoming Nicolas Duquette and Peter Gray to WMC Water.

Nicolas Duquette, Senior Account Manager, Quebec

Nicolas brings more than 15 years of water treatment experience to WMC. He’ll work with customers across Quebec to develop treatment programs suited to their equipment, operating conditions, and priorities.

 

Peter Gray, VP of Industrial Water Treatment

Peter brings more than 35 years of experience in chemical formulation and manufacturing, industrial water treatment, and wastewater treatment. His expertise will support the continued growth of WMC’s industrial water treatment services across Canada.

 

Case Study Spotlight: Bringing Cooling Tower Bacteria Under Control in One Week

A Southwestern Ontario facility contacted WMC after finding high bacteria counts and visible algae in its cooling tower. Our review found that the biocide program was insufficient and that a severely plugged injection line was preventing proper dosing.

Our team took four steps to address the issue.

  • Cleared the blocked injector and line
  • Corrected the biocide dose
  • Pressure washed the cooling tower
  • Followed up daily to confirm a measurable free chlorine residual

Within one week, the bacteria count fell from a reported 10,000,000 CFU to below 10,000 CFU/mL. The facility also reported a much cleaner tower tray.

Read the Full Case Study >

Get Your Water Treatment Systems Ready for Winter

If your facility is getting ready for colder weather, WMC can test your glycol, confirm your level of freeze protection, and help you prioritize any corrections before peak heating season.

Contact Our Team to Schedule a System Review >